Unisite Group Ltd.
Model No.: USA-243
Certificate: BV CCS
Dimension: As Per Drawing/order
Tolerance: High Accuracy(ISO2768, ISO5817, ISO13920)
Standard: AISI, ASTM, BS, DIN, GB, JIS
Marine Engineering: Dredging Support
Application: Cutter Suction Dredger Parts
Grade: Grade D, S690Q With Z-quality Or Other Materials
Steel Marine Dredging Spud: Dredging Steel Marine Spuds
Packaging: bulk package and bulk vessel transportation
Place of Origin: china mainland(zhejiang)
The lower point is made of solid steel to ensure sufficient strength during ground penetration. When the spud is hoisted, water may escape through two holes above the lower point. On top, a hoisting eye allows for a crane to replace the spud easily. Standard spuds are made of grade A steel, but it is possible to other material.
The specifications of our spud
High accuracy, fully welded, painted construction can be used for Cutter Suction Dredger.
When the cutter suction Dredger is working, two spuds insert the sea alternatively, one is main pile, always aligned pocket centerline and the other is vice pile used forward exchange, to meet dredger back and forth and meet dredging work.
B. Construction and procedure
The construction is to be built according to the drawing with rules of good workmanship and to be built the longitudinal frame system.
The construction is of rolled Steel Pipe sections with varying wall thickness, from40mm to 150mm, which are carefully manufactured and checked to ensure roundness, straightness, segment connection deflection within the specific tolerances.
Pre-roll bending pf plate-Rolling of cylindrical hull-Welding the vertical seam to close the section-Heat treatment-Rolling to correct ovality-Assemble of the several pipe sections-Assemble with accessories(Sheave, expansion part etc.)
All fabricated steelwork used in the construction of the spud will be to manufacturing standard of classification society BV, GL, LR, DNV
All steel used to be blasted and shop primed both sides. Using DH36 and D690
All materials proposed will be selected to comply with the latest Health and Safety Rules.
Paint systems for hull protection will be of the highest quality (Hempel, Inter, Sigma, Jotun)
All welding will be performed in accordance with drawing and order and UniSite experience and all welding will be continuous and full penetration.
Welding seam preparation, welding method, welding material and consequent preheating temperature acc. to UniSite standards and approved by clients.
UniSite will control preheating, cooling down rate
Weld surface on the outside spud surface are to be grinded flush.
All welding to be examined UT and some to be examined X-ray.
The workmanship have good marine practice. Care are taken to ensure fair lines, smooth surfaces and neat welding.
G. Main particulars
High accuracy(ISO2768, ISO5817, ISO13920)
DH36, D690 with Z-quality or other materials
As per drawing, as large as we can
Sa2.5 blasted and two or three layers painted with highest quality
as per clients' requirements
material, construction, dimension, welding seam, non defective test, paint inspection
We made OD2600*63m with total 360Ton spuds for world top dredging company.
Recyclable, in line with environmental requirements and standards, and reliable
- Material certificates by a classification society EN10204 3.2
- Inspection protocol
- NDT reports
- Official certificates for accessories and other equipment
- Fixed certificate: ISO9001, BV certificate, CCS certificate
Photos of our Steel marine dredging spud
How to contact us?
Send your Inquiry Details in the Below, Click "Send" Now!