Unisite Group Ltd.
Fender also known as the boat fender, wharf or ship edge using a kind of elastic buffer device, wood and rubber. Mainly used to slow the ship and the dock or between ships in dock or mooring process impact, to prevent or eliminate damage to a ship or dock.
Photo of our High Strength Fender:
Brief introduction of the types and characters of rubber fender
1) cylinder type rubber fender:
Characteristics of low reaction force, low surface pressure, reasonable energy absorption; in berthing, on the ship roll roll and pitch shake adaptability is not affected by the influence of the size of the ship, wide purpose and convenient installation and maintenance, and is particularly suitable for the old wharf.
2) semicircle type (D type) rubber fender:
Characteristics of suitable reaction force, it may absorb more energy than that of cylindrical type; installation is more convenient to work; due to the small size of the bottom width, especially for in frame dock and the ship's rail installation and use.
3) DO type rubber fender:
Characteristics of reaction energy absorption than D type fender high; installation strength and service life than D-type fender is greatly improved; applicable to frame dock.
Arch type (type V) rubber fender: force moderate, high energy absorption; firm installation, convenient;
Applicable to all types of terminal.
4) DA type rubber fender:
Characterized by high energy absorption and low reaction force, the product has a higher stress dispersion, long service life; the front end of the board can reduce the surface pressure; complete installation of various specifications; easy to replace.
5) drum type rubber fender:
Characteristics of low reaction force and high energy absorption; surface pressure on 25 tons / 2 m below; inclined compression mechanical properties reduce; PI type rubber fender: features low reaction force, high energy absorption; convenient installation; generally suitable for medium to large terminal.
Fender transport and storage
1, transport 1) to protect the string of transport vehicles for the transport of.
2) fender in loading and unloading process, to take the correct lifting way shall keep clean, not throw hit, not to hard hooks, spines, row, fender placed to secure.
3) place good goods to be strong, to ensure that the goods in the whole transport process is not shift, not loose.
4) the goods to the designated site after unloading the equipment with suitable lifting, avoid collision and damage.
2, storage 1) rubber protection products in storage, should avoid direct sunlight, avoid rain and snow, avoid with acid, alkali, oil and organic solvents and other substances to come in contact with; from the source of the one meter away, inventory temperature maintained at - 15 DEG C to 40 degrees.
2) fender storage area of about 400 square
In the small and large ship to ship inflatable rubber fender selection case
Inflatable rubber fender size from 500 mm to 4500 x 1000 x 12000 mm range, including all of the standard and non standard size.